Every charger online.Every kilowatt billed.
Vidutbeem connects chargers of any brand, bills every session by UPI or wallet, shares power within your grid limit with AI, keeps uptime high and gives fleets and drivers a simple way to charge.

Slow Bay 3 (fleet, leaves at 6 am) to 7 kW after 8 pm and give Bay 2 the headroom. Saves ₹1,140 tonight.
Six bays. One console.
Each bay below is one part of the platform, shown on the screen it runs on. Pull in, look at the display, and see what your operations team would see tonight.
Every charger and site on one live map.
Status, utilization and revenue for every connector you run, across every city. Works with OCPP-compatible chargers from most brands, so mixed AC and DC hardware sits on one screen.
- Connector status refreshed every few seconds
- Utilization heatmaps by hour and day
- Read-only views for hosts and site owners
Paid by UPI, wallet, card or fleet account. Invoiced with GST.
Every session closes with a tax invoice and settles into your own gateway. Tariff Studio sets prices by time of day, user group and site, so a resident, a fleet and a guest each pay the right rate.
- UPI pre-authorisation with automatic balance release
- Idle fees after charging ends
- Peak, off-peak and member pricing per site
| Session | Charger | Paid by | kWh | Amount |
|---|---|---|---|---|
| #S-48211 | Bay 1 · CCS2 | UPI | 24.6 | ₹455.10 |
| #S-48210 | Bay 3 · Type 2 | Fleet | 18.2 | ₹291.20 |
| #S-48209 | Bay 2 · CCS2 | Wallet | 31.0 | ₹573.50 |
| #S-48208 | Tower B · AC | RFID | 9.4 | ₹112.80 |
| #S-48207 | Bay 6 · Type 2 | UPI | 6.1 | + idle fee |
The same grid connection. More cars charged.
The AI shares available power between active chargers. It respects the site grid limit, each car’s departure time and the peak tariff window. You set the rules and the limits, and every change shows its reason and its saving.
- Never exceeds the grid limit you set
- Slows flexible cars, never cuts them off
- Explains every suggestion in rupees
Every vehicle full by shift start.
Charging schedules for cab, delivery and bus fleets, built around shift times and the cheapest hours. Cost per vehicle and per kilometre lands in one depot report for finance.
- Shift-based schedules per vehicle
- True cost per kilometre
- Public charging billed to the fleet account
| Vehicle | Charge | Departs | Cost/km |
|---|---|---|---|
| DL1C 4471 Sedan | 92% | 5:30 am | ₹1.62 |
| DL1C 4486 Sedan | 74% | 6:00 am | ₹1.58 |
| DL3E 0921 Cargo 3W | 48% | 7:00 am | ₹0.71 |
| HR55 8812 Van | 100% | 6:30 am | ₹2.10 |
| DL1C 4502 Sedan | 22% | 5:45 am | ₹1.66 |
Faults found before drivers find them.
Error codes become plain-language alerts in seconds. Many clear with a remote reset. The rest become a technician ticket with the fault history attached, and uptime is tracked by charger and site.
- Automatic soft reset, then escalation
- Technician tickets with SLA timers
- Monthly uptime reports for hosts
Find. Scan. Charge. Pay in seconds.
Drivers see live availability and price, start by scanning the QR code on the charger and pay by UPI. No app install is needed for a first session, and your own brand can go on the app.
- Live connector status from the charger itself
- Price and speed shown before and during charging
- White-label app on the Network plan
One night at a busy site.
Shoppers, a cab fleet, a peak tariff and one broken connector. Here is how the platform handles a real evening, hour by hour.
- 6:10 pm
Fleet returns
Twelve QuickCab sedans plug in at the depot. Each one has a departure time.
- 7:42 pm
AI suggests
Slow the fleet car in Bay 3 after 8 pm. Give the headroom to a shopper in Bay 2.
- 8:00 pm
Peak tariff
Flexible charging drops to its minimum. Drivers with short stays keep full speed.
- 9:24 pm
Bay 5 fixed
Soft reset failed, technician replaced the connector, uptime clock restarts.
- 12:00 am
Off-peak
Energy is cheapest. Fleet vehicles ramp up together, still under 150 kW.
- 5:40 am
Fully charged
Every fleet car at 100% before its shift. Invoices and the depot report are ready.
Built around the places EVs actually park.
Charge-point operators
Run public networks across cities with one console, one billing flow and one uptime report.
- Multi-site revenue and utilization
- Host revenue share
- Roaming integrations
EV fleets
Cabs, delivery two and three-wheelers and buses that must leave the depot full.
- Shift-based charging
- Cost per km
- Driver RFID control
Housing societies
Shared chargers in basements, billed to each flat without spreadsheets.
- Resident RFID cards
- Monthly statements
- Sanctioned-load protection
Malls
Turn parking into revenue with shopper pricing and peak-aware power sharing.
- Guest UPI payments
- Idle fees
- Building load sensing
Hotels
Free or paid charging for guests, with room-linked access and clean reports.
- Guest-only tariffs
- Reservations
- Concierge view
Office parks
Employee charging with fair sharing across hundreds of parked cars.
- Employee groups
- Payroll exports
- All-day load balancing
Fuel-station chains
Add DC fast chargers to forecourts and manage them across hundreds of outlets from day one.
- Outlet-wise reports
- Dealer access
- Fast-charger uptime
From unboxed charger to first invoice in a day.
Point to Vidutbeem
Enter our OCPP server URL and the charger ID on each unit. It appears on the Charger Map within seconds.
Set the site
Group chargers into sites, add the grid limit, connect your payment gateway and GSTIN, and publish a tariff.
Open the bays
Print the QR stickers, switch on the AI Load Balancer rules and start taking sessions.
The AI works for the operator, inside the operator’s rules.
Power decisions affect drivers, buildings and the grid. These are the lines the platform does not cross.
Charger safety first
Works only within operator limits and the charger’s own safety systems. It never overrides charger safety controls.
Drivers always see the price
Charging speed and price are shown before and during every session.
Location with permission
The driver app uses location only to find nearby chargers, and only when the driver allows it.
Data never sold
Operator and driver data is encrypted in transit and at rest, and never sold.
What operators ask before they plug in.
Still unsure about your hardware or your billing setup? Our team can check your charger models and site layout with you.
Most chargers that support OCPP 1.6J or OCPP 2.0.1. That covers the majority of AC and DC chargers sold in India today. Share your models with us and we will confirm before you connect.
Yes. Each resident gets an RFID card or app login tied to their flat. Energy and charges are tracked per flat and a monthly statement goes to the society committee.
No. The AI Load Balancer only adjusts charging speed within the minimum power and priority rules you set. Starting and stopping a session is always a driver or operator action.
Yes. UPI is the default for guest sessions started by QR code. Wallets, RFID cards and fleet accounts are also supported.
Yes. The Network plan includes a white-label driver app with your name, colours and store listings.
A single site usually goes live the same day. You set our OCPP server URL on each charger, group chargers into sites, connect your payment gateway and publish a tariff.
It works only through standard OCPP smart-charging profiles and only within limits set by you and by the charger. It never overrides the charger’s own safety systems.
Your first five chargers are on us.
Connect up to five chargers and run every part of the platform for 60 days. If the numbers work, pick a plan. If not, unplug.